weBoost Connect 4G-X Building Signal Booster + SurgeProtect + Ant Mnt *DISCONTINUED

This System Has Been Discontinued -- Replaced By the weBoost Home Complete Signal Booster System

-------------------------------------------------------------------------------------------------------------

Features:

• weBoost's Most Powerful 4G Signal Booster, Surge Protector & Outside Antenna Pole Mount
• Covers 7,500 sq ft. (With Good Outdoor Signal)
• Ideal for Large Homes, Offices & Multi-Story Buildings
• Boost Voice Plus 3G & 4G Internet Signals
• Works For AT&T, Verizon, T-Mobile, Sprint & Others
• Works With Multiple Devices

weBoost Connect 4G-X

The weBoost Connect 4G-X Signal Booster is perfect for larger buildings such as larger homes, offices, warehouses, etc. It is a simple and efficient solution to maintain continuous communication. The system works for all cellular-enabled devices including, cell phones, iPhone, BlackBerry, smartphones, tablets, Hot Spots, MiFi devices, cellular data USB cards, cellular routers, etc.

Includes Lightning Surge Protector and Pole Mount For Outdoor Antenna

This system includes the weBoost Connect 4G-X 471104 plus a Lightning Surge Protector and a Pole Mount for the Outside Antenna. 

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Service Providers Covered

The weBoost Connect 4G-X covers all carriers in the United States using 800MHz and 1900MHz for phone calls as well as 3G Internet. It also covers most 4G frequencies.

• All Carriers In The U.S. Using 800MHz, 1900MHz, 3G Internet
• AT&T 4G 700MHz LTE
• Verizon 4G 700MHz LTE
• T-Mobile 4G 700MHz LTE, 1700/2100MHz
• Sprint 1900MHz G 

Coverage Area

How Large An Indoor Area Will This Signal Booster Cover?

With a very good signal outdoors (at the outdoor antenna location), this signal booster will cover up to 7,500 sq ft indoors. The amount of indoor coverage area is dependent on the outside signal strength. The stronger the outdoor signal, the more indoor area coverage. Like all signal booster systems, this system requires the outdoor antenna to be placed in an area where there is a good consistent signal in order to get the most improved signal coverage area indoors.

Estimated Coverage Area For This System Configuration

How To Get The Best Coverage

The key to getting the best indoor signal coverage, is getting the outdoor antenna to where the signal is best. The stronger the outdoor signal, the larger the coverage area indoors. If your signal is 2 bars or less and fluctuates downward a lot, you will not get much coverage on the inside. In this case your phone will need to be very close to the indoor antenna to see signal improvement.

For Large Homes & Commercial Buildings - Consider WilsonPro Signal Booster Systems.

We can help you select the best system for your building. Feel free to Contact Us  with your requirements.

Also See: Estimating Coverage Area

This System Includes:

• weBoost Connect 4G-X 70dB Amplifier
• Outdoor Directional Antenna With U-Bolt Pole Mounting Bracket
• Pole Mount For Outdoor Antenna
• Indoor Panel Antenna With Wall Mount Brackets
• 75ft Wilson400 Coax Cable
• 60ft Wilson400 Coax Cable
• Lightning Surge Protector & 2 Foot Patch Cable

More weBoost Connect 4G-X Configurations, Antennas, Cable, and Accessories

Directional Outdoor Antenna Advantage

This Connect 4G-X system comes with an outdoor directional antenna. The advantage of the directional antenna is that it has a higher gain directed towards your cell service provider tower. It's especially useful for 4G frequencies and is the best solution for 4G Internet.

Lightning Surge Protector

Recommended - Installing a Lightning Surge Protector (Included) Install the 50 OHM lightning surge protector (LSP) close to the Signal Booster Amplifier. Attach the cable from the outside antenna to the surge protector. Ensure the LSP is properly grounded according to your local building codes. More Info: Lightning Surge Protector #859902 50 OHM

Installation

Installing the Connect 4G-X is easy and straightforward. You can install with minimal tools.

• Install Outside Antenna & Point Towards Your Service Providers Tower
• Install Inside Panel Antennas & Point Towards the Area You Want to Cover.
• Connect Cable from Amplifier to Outside Antenna
• Connect Cable from amplifier to Inside Antenna
• Connect Amplifier Power Supply

A step-by-step installation guide and video will walk you through the process. The antennas communicate with both cellular devices and your service provider's cell tower for the strongest, most powerful signal possible.

** WilsonPro - For Commercial Buildings & Larger Luxury Homes

For areas over 7,500sq ft, consider the WilsonPro line of commercial building cellular signal booster systems.

Documents

 More Information & Specs

 Installation Guide

 Quick Install Guide

Specifications

Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster is not in use for five minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1 minute. After 5 (five) such automatic restarts, any problematic bands are permanently shut off until the Signal Booster has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity are maintained by the Signal Booster’s microprocessor.

The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator.

No Use or Shipments Outside the U.S.

Unfortunately All weBoost and WilsonPro Signal Booster Systems can only be shipped and used within the United States. weBoost or WilsonPro products certified by the U.S. Federal Communications Commission (FCC) are no longer recognized by Industry Canada (IC) to be certified for use in Canada and cannot be used or shipped to Canada. There are specific version of Canadian Approved (IC) than can be used. Please contact a weBoost or WilsonPro dealer in your country for these systems.

THIS IS A CONSUMER DEVICE.

BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.

WARNING.

E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards