WilsonPro
WilsonPro Pro 4000R Enterprise Rack Mount Cellular Signal Booster System *Discontinued
- SKU:
- AP460231
- MPN:
- 460031
- Condition:
- New
- Availability:
- *** No Longer Available
Description
WilsonPro 4000R Enterprise Cellular Signal Booster
The WilsonPro 4000R cell booster incorporates four separate signal amplifiers feeding four indoor antennas.
The 4000R literally delivers the power of four boosters in a single rack mount unit, and provides cell coverage for up to 100,000 square feet of indoor space (even more depending on the strength of the incoming signal from the tower). The 4000R's design offers enhanced cellular coverage for large commercial buildings, including hospitals, hotels, warehouses and offices.
- Large Buildings
- Hospitals
- Hotels
- Warehouses
- Office Buildings
- Up To 100,000 Sq Ft
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Coverage Area
How Large An Indoor Area Will This Signal Booster Cover?
With a very good signal outdoors (at the outdoor antenna location), the Pro 4000 system will provide up to 100,000 sq ft of improved cellular signal indoors. The amount of indoor coverage area is dependent on the outside signal strength. The stronger the outdoor signal, the more indoor area coverage. Like all signal booster systems, this system requires the outdoor antenna to be placed in an area where there is a good consistent signal in order to get the most improved signal coverage area indoors.
Estimated Coverage Area For This System Configuration
Signal Strength | Estimated Indoor Coverage Area |
-100 db (1-2 Bars) | 10,000 sq ft |
-90 db (3-4 Bars) | 40,000 sq ft |
-80 db (5 Bars) | 100,000 sq ft |
WilsonPro Pro 4000 Kit Includes
This kit comes standard with the Pro 4000 amplifier, outdoor antenna and 4 indoor antennas.
- WilsonPro 4000R Cellular Amplifier
- 1 - Yagi Directional Outdoor Antenna
- 4 - Ceiling Mount Dome Indoor Antennas
- 1 - 75 Foot Wilson400 Low Loss Cable
- 4 - 100ft Wilson400 Low Loss Cables
- 1 - Lightning Surge Protector
- 1 - 2 foot Wilson400 Low Loss Cable
Extended Dynamic Range Technology
The 4000R incorporates Wilson's new XDR, or Extended Dynamic Range Technology. With XDR, the booster can accept any incoming signal strength without shutting down. There is no longer a need to worry about too strong of an incoming signal. This is a big breakthrough for those buildings with close cell towers that overpowered other signal boosters.
About The 4000R
The WilsonPro 4000R amplifies weak cell signals to give reliable voice and data coverage – including 4G – to inside spaces where signals may not penetrate. It has adjustable uplink and downlink gain controls on each band make it easy to customize the cell phone booster for any specific signal environment.
Each port offers the highest maximum downlink power of up to +12dBm,. In a strong signal environment, this booster will offer more coverage and more flexibility that any other booster on the market
Like all WilsonPro cellular signal boosters, the WilsonPro 4000R features cell site protections that auto-detect and prevent any cell tower interference.Wilson Electronics quality and an industry-leading three-year warranty market.
The 4000R a clear choice for the professional technology integrator. Because every job is a little different, WilsonPro has expanded its antenna offerings. Our newest antennas, the wideband Outdoor Omni Donor and the wideband Indoor Dome, receive and send signals in a 360° pattern and are compatible with the 698 – 2700 MHz frequency ranges.
WilsoPro 4000R Enterprise Cell Signal Booster Specifications
Model Number | 460031 | ||||
Product Number | U460031 | ||||
Connectors | N Female | ||||
Antenna Impedance | 50 Ohms | ||||
Frequency | 698-716 MHz, 746-787 MHz, 824-894 MHz, 1850-1990 MHz, 1710-1755/2110-2155 MHz | ||||
Passband Gain (nominal) |
700 MHz 57.8 dB |
700 MHz 57.8 dB |
800 MHz 59.8 dB |
1700/2100 MHz 62.5 dB |
1900 MHz 63.6 dB |
20 dB Bandwidth (MHZ) Typical |
700 MHz 29.8 |
700 MHz 29.7 |
800 MHz 36.4 |
1700/2100 MHz 76.7 |
1900 MHz 73.8 |
Maximum Power |
|||||
Power output for single cell phone (Uplink) dBm |
700 MHz 24.7 |
700 MHz 25.7 |
800 MHz 25.3 |
1700/2100 MHz 26.1 |
1900 MHz 25.2 |
Power output for a single cell phone (Downlink) dBm |
700 MHz 14.3 |
700 MHz 13.4 |
800 MHz 12.9 |
1700/2100 MHz 11.5 |
1900 MHz 9.1 |
Power output for multiple received # Phones |
700 MHz Band 17 |
700 MHz Band 13 |
800 MHz Band 5 |
1700/2100 MHz Band 4 |
1900 MHz Band 2 |
2 | 18.0 | 18.3 | 21.1 | 17.6 | 22.1 |
3 | 14.5 | 14.8 | 17.6 | 14.1 | 18.6 |
4 | 12.0 | 12.3 | 15.1 | 11.6 | 16.1 |
5 | 10.0 | 10.3 | 13.1 | 9.6 | 14.1 |
6 | 8.5 | 8.8 | 11.6 | 8.1 | 12.6 |
Power output for multiple received # of Phones |
700 MHz Band 17 |
700 MHz Band 13 |
800 MHz Band 5 |
1700/2100 MHz Band 4 |
1900 MHz Band 2 |
2 | 11.2 | 12.5 | 14.0 | 11.4 | 10.5 |
3 | 7.7 | 9.0 | 10.5 | 7.9 | 7.0 |
4 | 5.2 | 6.5 | 8.0 | 5.4 | 4.5 |
5 | 3.2 | 4.5 | 6.0 | 3.4 | 2.5 |
6 | 1.7 | 3.0 | 4.5 | 1.9 | 1.0 |
Noise Figure | 5 dB nominal | ||||
Isolation | > 90 dB | ||||
Power Requirements | 110-240 V AC, 50-60Hz, 30 W | ||||
Warranty | 3 Year Wilson Electronics Warranty |
THIS IS A CONSUMER DEVICE.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING.
E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards